HOME    |   ABOUT US    |    SHOP    |    REVIEWS   |   HOW TO DEPOT   |   WHAT'S IN YOUR UNII?   |    CLEANING YOUR UNII   |   STUFF THAT FITS   |   BLOG

 


How to care for
your UNII Palette



 

*Important notice: Please do not clean your palette with chemicals such as rubbing (isopropyl) alcohol, Windex, or other solvents. Please read the instructions below.

First, carefully remove the rubber gasket and steel (magnetic) plate at the bottom. Removing these and washing them separately will prevent the steel plate from scratching the paint off of the inner surfaces of the palette. The mirror is not removable. Please do not use chemicals or cleaning products containing isopropyl alcohol, ammonia, chlorine, or abrasive ingredients, and do not use rough towels or cloths to dry the plastic.

 

   
   
   
   
 

The gasket

The rubber gasket can be removed and washed in the sink with mild soap and water. Dry thoroughly before replacing.

   

The steel

The steel plate can be wiped down with a damp soft cloth. Make sure to fully dry the steel plate to prevent it from rusting.

 
   
   


 

The body

Carefully clean and wipe the palette with a damp soft cloth. Any abrasion or chemicals may result in removal of the paint on the inner surfaces. The mirror can be cleaned with a damp soft cloth, or with a mild soap if needed. Do not dunk your palette in water, doing so might result in water getting stuck behind the mirror.

   
   

Reassembly

Please make sure everything, especially the steel plate, is completely dry before reassembling your palette, because the steel can rust if water or moisture remains trapped between the steel and plastic case. First, carefully place the dry steel plate, painted side facing up. Next, carefully insert the rubber gasket into the groove along the perimeter of the case.